Learn Step By Step How To Make Super Looper Loom Bands.This loom band bracelet (Also call it the Super Looper!) looks absolutely amazing, but is really easy to make.
For This you’ll need:
- 26 black bands
- 4 green bands
- 4 orange bands
- 4 pink bands
- 1 clip
Setting Up Your Loom!
Set up your loom in the STAGGERED configuration, making sure the arrow is facing away is facing you, then place the bands in the order shown in the diagram.
Turn your loom so the arrow is Facing towards you with this design, you’re going to be looping only the black bands in reverse order to how they were placed, starting with band 26. So, putting your hook inside this peg, push back the top band, hook the bottom black band and loop it diagonally to the upper left-hand peg.
Putting your hook back in the peg you just looped to, catch the bottom black band from inside and loop it diagonally to the peg on the upper right-hand side.
Now, putting your hook back in the peg you just looped to, catch the bottom black band from inside and loop it diagonally to the peg on the upper left-hand side.
Keep hooking and looping the black bands in this zigzag pattern to the end of the loom. Make sure you always hook the bottom band from inside the other coloured bands on the peg.
Pull all the bands off the loom. Then, to complete your bracelet, attach both loops of the last black band from the other end of the chain into the clip as well.
Once you’re at the end of the loom, slide both ends of the last black band off the last peg and onto your hook. Now, slide your clip onto both of them to attach them together.