Home / Bracelets / How To Make loom bands Triple Rainbow Breacelets

How To Make loom bands Triple Rainbow Breacelets

Learn step by step how to make loom bands triple rainbow bracelet.

From this review you will learn how to make rainbow loom bands bracelets. This bracelet enhances your wrist by the beauty of rainbow.With simple eleven steps you can make this bracelet.

vlcsnap 2015 05 29 03h46m39s109 - How To Make loom bands Triple Rainbow Breacelets

For making loom bands triple rainbow bracelet project you’ll need:

  • 20 black bands
  • 6 red bands
  • 6 orange bands
  • 6 yellow bands
  • 6 green bands
  • 3 blue bands
  • 3 purple bands
  • 3 pink bands
  • 1 clip

Setting up your loom to make loom bands triple rainbow bracelet!

Set up your loom in the SQUARED configuration, making sure the arrow is facing away from you, then place the bands in the order shown in the diagram.

triple rainbow 1 1 180x1024 - How To Make loom bands Triple Rainbow Breacelets

Step 1:

Turn your loom so the arrow is facing towards you. With this design, you’re going to looping the coloured bands in reverse order to how they were placed, starting with the first green band under black band 35. So, putting your hook inside this peg, catch the first green band and loop it diagonally to the upper left-hand peg.

loom bands triple rainbow 1 - How To Make loom bands Triple Rainbow Breacelets

Step 2:

Putting your hook back in the peg you just looped to, catch the yellow band from inside and loop it forward.

loom bands triple rainbow 2 - How To Make loom bands Triple Rainbow Breacelets

Step 3:

Now, put your hook in the peg you just looped to, then reach through the yellow and black bands to catch the bottom orange band before looping it forward.

loom bands triple rainbow 3 - How To Make loom bands Triple Rainbow Breacelets

Step 4:

Continue looping the next eight coloured bands in this way, making sure to always go inside the black bands to hook the bottom coloured bands. Note that the last red band will be hooked as normal, but looped diagonally to the central row.

loom bands triple rainbow 4 - How To Make loom bands Triple Rainbow Breacelets

Step 5:

Go back to the first central peg, go inside the black top band, catch the next green band and loop it diagonally to the upper right-hand peg.

loom bands triple rainbow 5 - How To Make loom bands Triple Rainbow Breacelets

Step 6:

Now repeat the steps 2-4 on the right-hand side.

loom bands triple rainbow 6 - How To Make loom bands Triple Rainbow Breacelets

Step 7:

Once more go back to the first central peg, go inside the black top band, hook the bottom green band and loop it forward.

loom bands triple rainbow 7 - How To Make loom bands Triple Rainbow Breacelets

Step 8:

Hook and loop the next ten coloured bands in the central row in the same way, making sure to always go inside the black bands and only catch the bottom coloured band in your hook.

loom bands triple rainbow 8 - How To Make loom bands Triple Rainbow Breacelets

Step 9:

Now, put your hook in the peg you just ended on, reach down inside, catch the bottom black band and loop it forward.

Step 10:

Slide both ends of the last band off the last peg and onto your hook before pulling all your bands off the loom.

loom bands triple rainbow 9 - How To Make loom bands Triple Rainbow Breacelets

Step 11:

Now extend your bracelet using the remaining black bands.

This is a video tutorial to show you how to make loom bands triple rainbow loom band.


About admin

x

Check Also

christmas card svg a glitter and sequin shaker card from fresh cuts - Christmas Card SVG - a Glitter and Sequin Shaker Card from Fresh Cuts!

Christmas Card SVG – a Glitter and Sequin Shaker Card from Fresh Cuts!

On the lookout for an ideal Christmas Card SVG? This Glitter and ...