Home / Looms Bands / how to make power loom bands ring

how to make power loom bands ring

learn step by step how to make loom bands power ring.

In this tutorial you will learn how to make a beautiful power ring from which you can impress your friends.With simple eleven steps and the video given below you can make such a dashing power ring.

 loom bands power ring 0 - how to make power loom bands ring

For making loom bands power ring project you’ll need:

  • 7 blue bands
  • 12 orange bands
  • 4 red bands
  • 1 clip.

Setting up your loom to make loom bands power ring!

Set up your loom in  the STAGGERED configuration, making sure the arrow is facing away from you, then place the bands in the order shown in the diagram.

power ring 1 223x1024 - how to make power loom bands ring

Step 1:

Turn your loom so the arrow is facing towards you. You’re going to be looping the bands in reverse order to how they were placed. Put your hook inside blue band 23, reach down and catch the bottom blue band and loop it forward.

loom bands power ring 1 - how to make power loom bands ring

Step 2:

Hook and loop the next two blue bands in the chain on the same way.

loom bands power ring 2 - how to make power loom bands ring

Step 3:

The chain now forks. Go inside the peg, catch the top pair of orange bands and loop them diagonally to the upper left-hand peg.

loom bands power ring 3 - how to make power loom bands ring

Step 4:

Hook and loop the next two pairs of orange bands in the chain, noting that the second will be hooked as normal but looped diagonally to the central row.

loom bands power ring 4 - how to make power loom bands ring

Step 5:

Go back to where the chain forked and repeat steps 3-4 on the right-hand side.

loom bands power ring 5 - how to make power loom bands ring

Step 6:

Once more, go back to the peg where the bands fork, catch the bottom pair of red bands and loop them forward.

Step 7:

Now, loop the next pair of red bands, too.

loom bands power ring 6 - how to make power loom bands ring

Step 8:

Using your hook, reach inside the peg you just ended on and catch the bottom blue band and loop it forward.

Step 9:

Hook and loop forward the next two blue bands in the chain, too.

loom bands power ring 7 - how to make power loom bands ring

Step 10:

Now, slide both ends of the last band onto your hook and attach them together with a clip. Then, pull the rest of the bands off the loom.

Step 11:

To finish, slide the blue band from the other end of the chain into the clip as well.


About admin

x

Check Also

christmas card svg a glitter and sequin shaker card from fresh cuts - Christmas Card SVG - a Glitter and Sequin Shaker Card from Fresh Cuts!

Christmas Card SVG – a Glitter and Sequin Shaker Card from Fresh Cuts!

On the lookout for an ideal Christmas Card SVG? This Glitter and ...