Home / Looms Bands / How To Make Loom Bands Wolf

How To Make Loom Bands Wolf

Learn step by step how to make loom bands wolf. Wolf are the predators and are attacking animals their voice also sounds creepy and they give a look of terror.

For this project you’ll need:

6 Black bands

8 White bands

90 Grey / Silver bands

Setting up your loom!

Set up your loom in the STAGGERED configuration. Before placing grey band 53, wrap a black band around your hook four times. Now catch a grey band on the end of your hook, then slide the black band off the hook and onto the band. Place bands 58-62 twice to make two ears, and bands 63-71 four times to make four legs.

wolf 1 197x1024 - How To Make Loom Bands Wolf

Step 1:

Turn your loom do the arrow is facing towards you. You’re going to start by making the legs. To do this put your hook inside black band 71, catch the bottom pair of grey bands and loop them forward.

Step 2:

Hook and loop the next three pairs of grey bands in the same way.

loom bands wolf step 1 300x132 - How To Make Loom Bands Wolf

Step 3:

Put your hook in the last peg, slide the band ends off the peg and onto your hook, and pull them off the loom. This is your first leg.

loom bands wolf step 2 300x163 - How To Make Loom Bands Wolf

Step 4:

Now, slide the bands off your hook and onto the sixth peg on the left-hand side

 

Step 5:

Making sure the loom is facing the correct way, place more bands In positions 63-71 and repeat steps 1-4.

loom bands wolf step 3 300x155 - How To Make Loom Bands Wolf

 

Step 6:

Again, making sure the loom is facing the correct way, place more bands in positions 63-71 and repeat steps 1-3 twice more ; however, his time, stretch the legs off the hook and onto the tenth peg on the left-hand side.

loom bands wolf step 4 300x172 - How To Make Loom Bands Wolf

Step 7:

It’s now time to make the ears. Put your hook inside grey band 62, push it back, catch the bottom pair of grey bands and loom them forward.

Step 8:

Loop the next band forward, then put your hook in the last peg, slide the band ends off the peg and onto your hook, and PULL them off the loom. This is your first ear.

loom bands wolf step 5 300x111 - How To Make Loom Bands Wolf

Step 9:

Slide the band ends off the hook and onto the fourth peg up on the right-hand side.

Step 10:

With the loom facing the correct way, place more bands in positions 58-62 and repeat steps 7-9.

loom bands wolf step 6 300x111 - How To Make Loom Bands Wolf

 

Step 11:

Now, it’s time to make the face. Put your hook in black band 52, catch the bottom pair of grey bands and loop them forward.

loom bands wolf step 7 300x112 - How To Make Loom Bands Wolf

Step 12:

The chain now forks. Put your hook inside the peg you just looped to, catch the first pair of grey bands and loop them forward.

Step 13:

Now, put your hook inside the peg you just looped to, catch the bottom pair of bands and loop them diagonally to the right.

loom bands wolf step 8 300x108 - How To Make Loom Bands Wolf

Step 14:

Go back to where the chain forked, catch the bottom pair of bands and loop them diagonally to the right. Hook and loop the next pair of grey bands forward in the same way.

loom bands wolf step 9 300x132 - How To Make Loom Bands Wolf

Step 15:

You’ve now reached the body. You’ll be hooking bands 41-1 in reverse order to how they wereplaced, Put your hook inside this peg and loop the middle pair of bands diagonally to the central row.

Step 16:

Put your hook in the peg you just looped to catch the middle pair of bands and loop them diagonally to the left-hand side.

Step 17:

Hook and loop the next five pairs of bands in the chain forward. The fifth pair will be hooked as normal, but looped diagonally to the central row.

loom bands wolf step 10 300x168 - How To Make Loom Bands Wolf

Step 18:

Go to bands 27/26, and hook and loop them forward from inside the fifth central peg.

Step 19:

Hook and loop the next five pairs of bands in the chain forward. The fifth pair will be hooked as normal, but looped diagonally to the right-hand row.

Step 20:

Go back to the start of the body. You’ve now got seven pairs of grey bands to hook and loop.

Step 21:

Put your hook in the peg you just looped to, reach down inside, catch the bottom grey band and loop it forward. Using your hook, pull the bottom of the band up through itself to create a slipknot.

Step 22:

Pull all your bands off the loom. To finish, tie a knot in the end of the slipknot band for a tail.

About admin

x

Check Also

christmas card svg a glitter and sequin shaker card from fresh cuts - Christmas Card SVG - a Glitter and Sequin Shaker Card from Fresh Cuts!

Christmas Card SVG – a Glitter and Sequin Shaker Card from Fresh Cuts!

On the lookout for an ideal Christmas Card SVG? This Glitter and ...