How to make loom bands sports band head wear

Learn step by step how to make loom bands sports band head wear.

In these projects you will learn how to make head-wear of different kinds and colours.New Doc 1_15
These headbands are really adaptive and are really easy to make with some bands you
can increase grace of your personality

So, get involved in the craze that’s sweeping the nation! Loads of amazing
projects for you to try.

For making loom bands sports band head wear project you’ll need:

  • 73 blue bands
  • 73 red bands
  • 145 white bands
  • 3 clips

Setting up your loom to make sports band headband!

Set up your loom in the SQUARED configuration, making sure the arrow is facing away from you, then place the bands in the order shown in the diagram.

Step 1:

Turn your loom so the arrow is facing towards you.You’re going to be hooking and looping the bands in reverse order ignoring the horizontal bands, starting with the first red band under band 39. So, putting your hook inside this peg, push it back , catch the bottom red band and loop it forward.loom bands sports head band step 1

Step 2:

Continue hooking and looping the remaining 11 red bands in the left-hand row in the same way.loom bands sports head band step 2

Step 3:

Now, put your hook in the peg under blue band 26, catch the bottom band and loop it forward.loom bands sports headband 3

Step 4:

Continue hooking and looping the remaining 11 blue bands in this way, making sure to always go inside the other bands on the peg to hook the bottom band.loom bands wild head band step 4

Step 5:

Now, put your hook in the peg under blue band 26, catch the bottom band and loop it forward.loom bands wild head band step 5

Step 6:

Continue hooking and looping till the remaining 11 white bands in this way, making sure to always go inside the other bands on the peg to hook the bottom band.loom bands wild head band step 6

 

Step 7:

Now you’ve reached the end of  the loom, one by one put your hook into the last peg in each row, then slide the bands off the peg and onto the hook.

Step 8:

Now, remove all the bands from the loom.loom bands wild head band step 8

Step 9:

Place bands 1-51 again, except  this time don’t place bands 13, 26 or 39. Instead, slide the correct coloured band ends off your hook and onto the corresponding coloured peg.

Step 10:

Repeat steps 1-9 a further four times, so you’ve placed all of your bands.loom bands wild head band step 10

Step 11:

Then, repeat steps 1-8 once more, to loop the last batch.loom bands wild head band step 11

Step 12:

Attach each pair of band ends that are on your hook together with a clip before sliding your hook away.

Step 13:

Finally, slip the corresponding coloured band from the other end of the chain into each clip. You’re now ready for your first sports game!