How to make loom bands Egyptian headdress headwear
Posted by: admin in Headwear, Looms BandsSeptember 15, 2017Comments Off on How to make loom bands Egyptian headdress headwear63 Views
Learn step by step how to make loom bands egyptian headdress necklace.
In these projects you will learn how to make head-wear of different kinds and colours.
These headbands are really adaptive and are really easy to make with some bands you
can increase grace of your personality
So, get involved in the craze that’s sweeping the nation! Loads of amazing
projects for you to try.
For this project you’ll need”
36 blue bands
36 black bands
186 gold bands
Setting up your loom!
Set up your loom in the SQUARED configuration, making sure the arrow is facing away from you, then place the bands in the order shown in the diagram.Place bands like this six times.
Turn your loom so the arrow is facing towards you.You’re going to be hooking and looping the bands in reverse order to how they were placed. So, putting your hook inside blue band 43, push it back , catch the bottom band and loop it horizontally to the left-hand peg.
Put your hook inside the peg you just looped to, catch the bottom gold band and loop it forward.
Now, put your hook in the peg you just looped to, catch the bottom gold band and loop it horizontally to the right-hand side.
Hook and loop the next gold band to the right-hand side.
Now, repeat steps 1-4 five at the blue band in the central row.
Now, go to gold band 13 (in the right-hand row), put your hook inside it, catch the bottom gold band and loop it forward.
Continue hooking and looping the remaining 11 gold bands in the right-hand row in the same way, making sure each time to go inside the other bands and only catch the bottom band each time.
Now, repeat steps 1-4 five times, each time starting at the blue band in the central row.
Place bands 1-43 again, except this time don’t place band 13. Instead, slide the band ends off your hook and onto the peg where band 13 should have gone.
Repeat steps 1-9 a further four times, so you’ve placed all of your bands.
Then, repeat steps 1-8 once move to loop the last batch.
Attach the band ends that are on your hook together with a clip before sliding your hook away.
Finally, slip the band from the other end of the chain into the clip. You’re ready to shine!