Home / Looms Bands / How to make loom bands dotty bracelets

How to make loom bands dotty bracelets

Learn step by step how to make loom bands dotty bracelets.

From this article you will learn how to make loom bands bracelets, the braceletsmost famous of all loom bands projects. They are very adaptable, you can use anynumber of colours to create some really attractive loom bands bracelets.

So, get involved in the craze that’s sweeping the nation! Loads of amazing projects for you to try.

For making loom bands dotty bracelets project you’ll need:

  • 32 blue bands
  • 9 white bands
  • 10 gold beads
  • 1 clip

Setting up your loom to make loom bands dotty bracelets!

Set up your loom in the STAGGERED configuration, making sure the arrow is facing away from you, then place the bands in the order shown in the diagram.dotty 1 193x1024 - How to make loom bands dotty bracelets

Step 1:

Turn your loom so the arrow is facing towards you. With this design, you’re only going to be looping the blue bands in reverse order to how they were placed starting with bands 26. so putting your hook inside the peg, push back the top band, hook the next blue band and loop it diagonally to the upper left-hand peg.

Dotty abn 1 300x295 - How to make loom bands dotty bracelets

 

Step 2:

Putting your hook back in the peg you just looped to, catch the bottom blue band from inside and loop it forward.

Dotty abn 2 300x234 - How to make loom bands dotty bracelets

Step 3:

 

Continue to hook and loop the next ten blue bands in the chain in the same way, always going from inside the other bands and only taking the bottom band each time. Be extra careful with the beaded bands, and note that the last band will be hooked as normal, but looped diagonally to the central row.

Dotty abn 3 300x247 - How to make loom bands dotty bracelets

Step 4:

Go back to band 26, PUSH it a back, catch the bottom blue band and loop it diagonally to the upper right-hand peg

 Dotty abn 4 300x273 - How to make loom bands dotty bracelets

Step 5:

Putting your hook back in the peg you just looped to, catch the bottom blue band from inside and loop it forward.

Dotty abn 5 300x259 - How to make loom bands dotty bracelets

Step 6:

Continue to hook and loop the next ten blue bands in the chain in the same way, always going from inside the other bands and only taking the bottom band each time. Be extra careful with the beaded bands, and note that the last band will be hooked as normal, but looped diagonally to the central row.

Dotty abn 6 300x241 - How to make loom bands dotty bracelets

Step 7:

Put your hook through the peg you just looped to, catch the bottom blue band and loop it forward.

Dotty abn 7 158x300 - How to make loom bands dotty bracelets

Step 8:

Slide both ends of the last band off the last peg and onto your hook before pulling all your bands off the loom.

Dotty abn 8 197x300 - How to make loom bands dotty bracelets

Step 9:

Now extend your bracelet using the remaining blue bands.

lidow 223x300 - How to make loom bands dotty bracelets

About admin

x

Check Also

christmas card svg a glitter and sequin shaker card from fresh cuts - Christmas Card SVG - a Glitter and Sequin Shaker Card from Fresh Cuts!

Christmas Card SVG – a Glitter and Sequin Shaker Card from Fresh Cuts!

On the lookout for an ideal Christmas Card SVG? This Glitter and ...