Home / Looms Bands / How to make loom bands cluser ring

How to make loom bands cluser ring

Learn step by step how to make loom bands cluster ring.

From this blog you will be able to seek, to, how to make loom bands cluster ring.This is very attracting ring and it will increase grace of your fingers.   loom bsnds cluster ring 1024x543 - How to make loom bands cluser ring

For making loom bands cluster ring project you’ll need:

  • 15 black bands
  • 1 pink band
  • 1 yellow band
  • 2 green bands
  • 2 orange bands
  • 2 blue bands
  • 1 clip.

Setting up your loom to make loom bands cluster ring!

Set up your loom in the STAGGERED configuration. Place the bands in the order shown in the diagram. Before placing black bands 4-11, take a coloured band, wrap it around the hook four times, then catch a black band on the end of the hook and slide the coloured band onto it. Then stretch it between the pegs as normal.

cluster 1 291x1024 - How to make loom bands cluser ring

Step 1:

Turn your loom so the arrow id facing towards you. You’re going to be looping the black bands in reverse order to how they were placed, so put your hook inside band 15, push it back, catch the bottom black band and loop it forward.

loom bands cluster ring 1 - How to make loom bands cluser ring

Step 2:

Hook and loop the next two bands forward in the same way.

loom bands cluster ring 2 - How to make loom bands cluser ring

Step 3:

The chain now forks. Put your hook inside the looped band to catch the next band down and loop it diagonally to the upper left-hand side.

loom bands cluster ring 3 - How to make loom bands cluser ring

Step 4:

Continue hooking and looping the next two black band in the chain forward, noting that the second will be hooked as normal, but looped diagonally to the central row.

loom bands cluster ring 4 - How to make loom bands cluser ring

Step 5:

Go back to where the chain forked, take the next black band and loop it diagonally to its original peg on the right-hand side.

loom bands cluster ring 5 - How to make loom bands cluser ring

Step 6:

Continue hooking and looping the next two black bands in the chain forward, noting that the second will be hooked as normal, but looped diagonally to the central row.

loom bands cluster ring 6 - How to make loom bands cluser ring

Step 7:

Once more, go back to where the chain forked, catch the bottom black band and loop it forward.

loom bands cluster ring 7 - How to make loom bands cluser ring

Step 8:

Continue hooking and looping the remaining four black bands forward, making sure to only catch the bottom band each time.

loom bands cluster ring 8 - How to make loom bands cluser ring

Step 9:

Now, put your hook through the band ends on the  last peg and attach them together with a clip.

Step 10:

Pull the bands off the loom, before sliding the black band from the other end of the chain into the clip as well.

This is a video tutorial to show you how to make loom bands cluster ring.


About admin

x

Check Also

christmas card svg a glitter and sequin shaker card from fresh cuts - Christmas Card SVG - a Glitter and Sequin Shaker Card from Fresh Cuts!

Christmas Card SVG – a Glitter and Sequin Shaker Card from Fresh Cuts!

On the lookout for an ideal Christmas Card SVG? This Glitter and ...