Home / Bracelets / How to make loom bands crossloop loom bands bracelets

How to make loom bands crossloop loom bands bracelets

learn step by step how to make loom bands crossloop bracelets.

From this article you will learn how to make loom bands bracelets, the bracelets
most famous of all loom bands projects. They are very adaptable, you can use any
number of colours to create some really attractive loom bands bracelets.

So, get involved in the craze that’s sweeping the nation! Loads of amazing
projects for you to try.

 

For making loom bands crossloop project you’ll need:

  •  26 white bands
  •  4 yellow bands
  •  4 red bands 
  • 4 orange bands
  •  3 purple bands
  •  3 blue bands
  •  3 green bands

Setting up your loom to make loom bands crossloop bracelets!

Set up your loom in the STAGGERED configuration, To place the coloured bands, twist them twice around your hook, then catch a white band on the end of the hook. Slide the coloured band off your hook and onto the white band.

cross loop 1 195x1024 - How to make loom bands crossloop loom bands bracelets

Step 1:

Turn your loom so the arrow is facing towards you. With this design, you’re going to be looping the white bands in reverse order to how they were placed, starting with band 26. So, putting your hook inside the peg, push back the top band, hook the bottom white band and loop it diagonally to the upper left-hand side.

crossloop abn 11 632x1024 - How to make loom bands crossloop loom bands bracelets

Step 2:

Putting your hook back in the peg you just looped to, catch the bottom white band from inside and loop it diagonally to the peg on the upper right-hand side.

crossloop abn 21 650x1024 - How to make loom bands crossloop loom bands bracelets

Step 3:

Now, putting your hook back in the peg you just looped to, catch the bottom white band from inside and loop it diagonally to the peg on the upper left-hand side.

crossloop abn 3 181x300 - How to make loom bands crossloop loom bands bracelets

Step 4:

Keep hooking and looping in this zigzag pattern, going green, yellow, orange, red, pink, purple, blue and repeating to the end of the loom. Make sure you always hook the bottom band from inside the other bands on the peg.

 

Step 5 :

Once you’re at the end of the loom, slide both ends of the last white band off the last peg and onto your hook. Now, attach them together with a clip.

Step 6:

Pull all the bands off the loom. Then, to complete your bracelet, attach both loops of the last white band from the other end of the chain into the dip as well.

About admin

x

Check Also

christmas card svg a glitter and sequin shaker card from fresh cuts - Christmas Card SVG - a Glitter and Sequin Shaker Card from Fresh Cuts!

Christmas Card SVG – a Glitter and Sequin Shaker Card from Fresh Cuts!

On the lookout for an ideal Christmas Card SVG? This Glitter and ...