Learn step by step how to make loom bands burster ring.
In This Article, You Will Learn How To Make Burster Loom Band Ring. You Just Need To Follow These Thitreen Simple Steps. This is quite easy and exciting, with less efforts you can make such a beautiful burster ring.
For making loom bands burster ring project you’ll need:
- 15 white bands
- 1 each of yellow, orange, red, pink, purple, blue, turquoise and green bands
- 1 clip.
Setting up your loom to make loom bands burster ring!
Set up the loom in the SQUARED configuration, making sure the arrow is facing away from you, then place the bands in the order shown in the diagram.
Turn your loom so the arrow is facing towards you. You’re going to start by looping the coloured bands from within white band 20. So, putting your hook inside the central peg, push it back, hook the top green band and loop it diagonally to the upper left-hand peg.
Go back inside white band 20, hook the turquoise band and loop it horizontally to the left-hand side.
Now, go back inside white band 20, hook the blue band and loop it diagonally to the lower left-hand peg.
Keep hooking and looping the remaining five coloured bands in the same way in an anticlockwise direction. When you’ve done this, the white band should be evenly stretched around the central peg.
Now, go inside white band 23, push it back, hook the bottom white band and loop it forward.
Hook and loop the next white band in the chain.
The chain now forks. Reach inside the peg, take the bottom white band and loop it horizontally to the left-hand side.
Hook and loop the next three white bands in the chain, making sure each time to go inside the other bands and only catch the bottom white band in your hook. Note the last band will be hooked as normal, but looped horizontally to the central row.
Repeat steps 7-8 with the white bands on the right-hand side.
Now, put your hook in the peg you just ended on, catch the bottom white band and loop it forward.
Continue looping the next two white bands in the chain forward in the same way.
Now, slide both ends of the last band onto your hook and attach them together with a clip. Then, pull the rest of the bands off the loom.
To finish, slide the white band from the other end of the chain into the clip as well.
This is a video tutorial to show you how to make loom bands burster ring.