In This Article, You Will Learn How To Make Basic Loom Band Chain. You Just Need To Follow These Six Simple Steps.
For this project you’ll need:
✓ 4 red bands ✓ 4 pink bands ✓ 4 purple bands ✓ 3 orange bands ✓ 3 yellow bands ✓ 4 green bands ✓ 4 blue bands • 1 clip
Setting up your loom!
Set up your loom in the STAGGERED configuration, making sure the arrow is facing away from you, then place the bands in the order shown in the diagram.
so the arrow is facing towards you. With this design, you’re going to be looping the bands in reverse order to how they were placed, starting with red band 2,6. So, putting your hook inside this peg, push back the top band, hook the bottom pink band and loop it diagonally to the upper left-hand peg.
Putting your hook back in the peg you just looped to, catch the Purple band from inside and loop it diagonally- to the peg on the upper right-hand side.
Now, putting your hook back in the peg you just looped to catch the blue band from inside loop it diagonally to the peg on the upper right-hand side.
Keep hooking and looping in this zigzag pattern, going green, yellow, orange, red, pink, purple, blue and repeating to the end of the loom. Make sure you always hook the bottom band from inside the other bands on the peg.
Once you’re at the end of the loom, slide both ends of the last green band off the last peg and onto your hook. Now, slide your clip onto both of them to attach them together.
Pull all the bands off the loom. Then, to complete your bracelet, attach both loops of the last red band from the other and of the chain into the clip as wet.